Ortea discusses three main causes of low power quality

ortea JuneOrtea aims to provide complete solutions for all these power quality problems. (Image source: Oran Viriyincy/Flickr)Ortea, the provider of design and construction of voltage stabilisers, transformers and power supply systems across the globe, has discussed main causes of low power quality and ways to solve them

Power quality is gaining increasing attention in the electric power industry. The consumer of electrical energy requires electric power with a certain quality, but loads can have a negative impact on the electrical system and are thus also subject to an assessment in terms of quality. Power quality is therefore intrinsically linked to the interaction between the electrical system and loads and must take into account both the voltage quality and power quality.

 

Possible consequences of low power quality that affect business costs are:

· Power failures (Release switches, fuses blowing).

· Breakdowns or malfunctions of machines.

· Overheating of machines (transformers, motors, etc) leading to reduced useful life.

· Damage to sensitive equipment (computers, production line control systems, etc).

· Electronic communication interference.

· Increased distribution system losses.

· The need to oversize systems to cope with additional electric stress, resulting in higher installation and operational costs.

· Luminosity flickering.

Interruption of production due to these impacts of low power quality entails high costs due to production loss and the associated waste. For the Industrial sector, the estimated costs due to poor power quality represent four per cent of turnover (Source: Studio Leonardo Energy). The impact of production interruptions is greatest in companies with continuous production.

ortea 2nd

Among the main causes of poor power quality in low voltage are:

· Voltage variations, because equipment operates less efficiently.

· Harmonic pollution, which causes additional stress on the networks and systems, causing them to operate less efficiently.

· Excessive reactive power, because it charges useless power to the system.

The solutions vary for each cause. The voltage variations can be reduced with a voltage stabiliser, which ensures a voltage output at a nominal value. Reduced productivity, loss of data, loss of security and machine breakdowns are only some of the problems caused by an unstable power supply that can be solved with a voltage stabiliser.

Harmonic pollution is caused by large amounts of non-linear consumption (from inverters, soft starters, rectifiers, power electronics, non-filament lighting, presses, etc). Such devices deform the electrical current causing disturbances and problems to the system. Harmonic pollution is solved by active filters that are capable of eliminating the current harmonics in the system by measuring and injecting the same current, but in the opposite phase.

Excessive reactive power is regulated by a power factor correction system, which not only avoids any penalties due to excessive reactive energy, but reduces the “unnecessary” electrical current that flows into the lines and power components, yielding substantial benefits, such as reducing voltage drops along the lines and leakages due to the Joule effect.

Ortea provides complete solutions for all these power quality problems, see more on the website www.ortea.com

Alain Charles Publishing, University House, 11-13 Lower Grosvenor Place, London, SW1W 0EX, UK
T: +44 20 7834 7676, F: +44 20 7973 0076, W: www.alaincharles.com

twn Are you sure that you want to switch to desktop version?